How To Stain Your Concrete Floors Without A Trouble

Any floor can gain a new richness and beautified elegance by adding new colors to it. A concrete floor decorated with different translucent colors can easily boost the aesthetic appeal of your house. You can use any type of acid or acrylic water-based stain for your floors and convert them to enhance the appearance. Your floors also deserve a chance to have the attention and care to become embellished with a new charm. If you want to do something to make your concrete floors look more attractive and appealing, the best thing you can do is to use concrete staining in Riverside County CA, through the following easy ways.

Clean The Floors

Clean the floor thoroughly before you start the project. Remove all the dirt and dust with the help of a vacuum. Once the dirt is properly removed, use a cleaning solution and wash the floor with a soapy liquid so that any grease or stain will be cleaned off properly. The floor needs to be completely dry and free from any slimy or greasy surface. 

Repair Any Cracks And Holes

Check the floors and find out if there is any crack, hole, or any other type. If there are holes or crack to be seen on the floors, you can fill them up with concrete filling and then buff the surface to level it down. You can use a buffer or a sander to and go around over the floor so that not a single inch will remain uneven.

Etch Your Floors

Use etching acid powder and add a reasonable amount of warm water in it, according to the quantity. Mix it thoroughly and scrub it all over the floors before you apply the stain. Etching the floors will automatically make the stain look more visible and glowing.

Cover The Sides

Use a broad sized painter’s tape and cover all the sides and corners in the room that lets the walls meet the floors. Applying proper protection to the sides will keep them safe from any color or marks of the staining material. Make sure that the room is properly emptied, and that nothing is left overlooked or uncovered before you stain your floors.

Create A Mixture

If the room in which you are staining has no ventilation system, open the windows to let the air cross properly. Bring out the stain color and mix it with the prescribed amount of water. Put the mixture in a plastic pump. Wear rubber gloves so that your hands will not get stained. If you are having any trouble in creating the perfect mixture, you can have a look at how the affordable concrete restoration companies in Riverside County CA prepare their solutions for staining.

Spray And Spread

Set the nozzle of the air pump and start spraying the stain all over the floors. Spread it with a broom to make different variations in the design and patterns. Once you get your desired staining pattern, let the floor dry for at least 3 to 4 hours before you can walk on it.